Thursday 12 September 2013

Down Sizing

I absolutely love being out on the water with Bluster but lately I have been longing for something a little simpler, a little more basic, a little more spontaneous...

Before Bluster, and going back many years I have owned a white water kayak, a 18.5 Clipper expedition canoe, a Seafarer sea kayak, a Laser sailboat, a C2 decked whitewater canoe and a Whithall replica rowboat.  These have all gone onto new owners years ago including the C2 which was stolen.  Compared to the Chebacco any of these little bloats were so easy to pop in the water and go.  Recently and nostalgically I have been revisiting my love of these simple human powered craft and particularly the canoe.

In 1979 my good friend Ryan and I spent the summer paddling, pulling and portaging my Clipper canoe from Fort Nelson, BC to the McKenzie River and down this to the McKenzie delta where we traveled upstream for ten days on the rat river.  We portaged through MacDougal  Pass and then started down the Bell and Porcupine Rivers to the Yukon River and finally to the highway bridge to Prudo Bay.  This trip took us three months and I turned nineteen years old on the way.

Rat River, Northwest Territories 1979

Kootenay Lake 2005

This past summer Lisa, the boys and I rented sea kayaks for a couple of hours to explore our the waters around Gibsons Landing which was a ball.



 I started researching canoes and a local company, Western Canoes and Kayaks makers of the Clipper Canoe line and my first canoe, caught my attention.  The next week WCK was having their one week end of summer sale where they slash the prices on demonstration, rental and last years models.  I drive by this place every day so I stopped and found they had the model and colour I wanted on for an awesome price.


We now have a new boat in the family.  She is a gorgeous shiny yellow 16.5 foot Clipper Tripper S.  The S model is slightly different from the standard and very popular 17.5 foot Tripper in that she is a little shorter and less beamy with a subsequent slight drop in capacity (but still plenty).  She also has a third centre thwart to be used for solo paddling.   At 66 pounds she is pretty easy to put on and off  the roof racks and I still have a little canoe dolly from a past boat for rolling along the road.

Canoe dolly - brilliant

Easy transport
Going forward I do not expect this canoe to usurp my beloved Bluster but to offer up some options for getting on the water.  That is what it is all about.

Wednesday 24 July 2013

I Have Been To The Pocket Yacht Palooza



This past weekend Lisa and I were up early to cross the US border and head to the beautiful town of Port Townsend, Washington to attend the Pocket Yacht Palooza.  This was held at and  around the Northwest Maritime Center which was the absolute perfect venue for this event.  Sixty five trailer boats, mostly but not all wooden construction and sail powered, were on display.   I spent several hours there mixing it up with the owners and other enthusiasts while Lisa wandered off to check out the rest of the town.

Northwest Maritime Center

The Saturday was set aside for static displays while the plan for Sunday was for on the water.

A couple of fetching open boats

There was one Chebacco boat  in attendance - Jamie Orr and his Wayward Lass had sailed over from Victoria to attend.

Wayward Lass - a well travelled Chebacco

Inside the shop

For any small boat trailer sailor in Southwest BC or the Pacific Northwest the Palooza is a 'must do'.  Its our tribe!  I'll be back.

http://pocketyachters.com/Port_Townsend_Pocket_Yachters/Calendar.html


Tuesday 9 July 2013

Not Really Marine Equipment, But Useful On A Small Sailboat Post No. 6

Gerber Steady Tool




This little device is one of many of the multi tools on the market.  It has the usual multi tool features like assorted knife blades, screw drivers, pliers, etc. that make these tools so useful to have near by on a small boat.  The really cool feature that caught my fancy is that it transforms into a micro tripod that is sturdy enough to support a point and shoot type camera.  I like to use a tripod and often pack around a mini tripod (and a multi tool) so I picked one up.   It comes with a rugged nylon belt case that I carry on my right hip which is odd considering I am left handed.



The review:
The Gerber Steady Tool looks and feels on the cheap plasticy side.  The pliers are deployed by turning the hands inside out.  Curved textured grips are nice.  The neon coloured tips are for style I guess.

The fancy new kid

This is no more apparent when compared to my fifteen year old original Gerber Multi Tool that has the manly feel and heft of all steel construction.  

The original (no plastic or neon)

That said the Steady Tool delivers the goods and does the job.  The tripod is easy to deploy and reasonably solid.   Gerber claims this is made of 'stainless steel components' but I am seeing rust spots on all the blades that look more like painted than stainless steel.  Bottle opener but no can opener seems a little backwards these days (?)


Tripod legs deployed

The larger and serrated of two blades

While the Gerber Steady Tool may not become a family heirloom like its predecessor it is totally useful and get the job done and the tripod feature has already earned its keep.

http://www.gerbergear.com/Outdoor/Tools/Steady-Tool_31-001043

Wednesday 3 July 2013

Canada Day Weekend With Friends

With nothing particular on the books for the Canada Day (July 1st) weekend I decided to get out on a little over nighter and and I put the word out to my small circle of sailing acquaintances for a possible meetup.  Most had plans but Curtis and his son Ben were keen so we decided to meet at Halkett Bay on Gambier Island as this is kind of between my launch at Gibsons Landing (closer)and Burnaby (much further) where Curtis keeps his Siren 17.   Comparatively my route was really straight forwards whereas Curtis and Ben had two significant tidal narrows, busy Vancouver harbour and the unpredictable Point Ackinson.

I was on the water by 8:30 a.m. after launching at Gibsons Marina.  The winds were light to nonexistent so I  employed combinations of sailing, motoring and motorsailing.

A beautiful morning to head out

With no big rush to get there I popped in to Centre Bay to check out the retired Canadian Armed Forces frigate that is being prepared to sinking by the artificial reef society.

Still above water

Upon entering the Halkett Bay Marine Park anchorage I spotted the characteristic Nonsuch 26 belonging to Mark and Nessa whom Lisa and I met in Gibsons Marina two years ago.  They very kindly invited me aboard for refreshments in their comfy covered cockpit.

I've seen this boat before...

Afterwards I picked my spot and dropped anchor then set up my rather unsophisticated Cockpit Cover 1.0 to get out of the sun.  Reading and a little nap followed.

Sun shade

Late in the afternoon Curtis and Ben arrived and they rafted up with Bluster for the night before we all set about making  dinner.

Neighbours arrive

Dinner

Later on Mark picked us all up in his inflatable for a lovely evening aboard their boat.  We counted twenty eight boat at anchor which is a fair cry from my last visit here when there was just a hand full.

Taxi

Early to bed and the morning Curtis and Ben headed over to the dinghy dock to do a walk about behead heading home while raised anchor and did a few lapse around the bay taking photos.

Morning


Siren at the dinghy dock

Bon journey!

Even though the previous night was fairly windy it was mostly calm for my motor back to Gibsons Landing where I picked up Lisa for a little spin into the Salish Sea before back to the busy ramp and the haul out.

Mate

A great holiday weekend and extra great to share it with some friends.





Friday 7 June 2013

Cruise to Halkett Bay Marine Park


If I picked a theme for this year it would be to 'explore locally'.  We like to cycle and hike and dine out and it was amazing to me the places that are close and that I after years of living in the same place I have never experienced.  Halkett Bay Marine Park is on the south shore of Gambier Island that we pass by regularly on the ferry to our Sunshine Coast cottage and I have never been there.

Weather was forecast for sunny, 19 degrees high and 10-15 knots south west winds.  With no particular commitments I decided to go for an overnight mini cruise and visit Halkett Bay Marine Park    (http://www.env.gov.bc.ca/bcparks/explore/parkpgs/halkett_bay/).

I arrived at Gibsons Landing Marina around 11:00 and by the time I had Bluster rigged and purchased launch ramp (such a deal at $10 including secured overnight parking) it was noon and the wind was certainly picking up.  Once free of all the Sunday kayaks, powerboats and sharp corners of of the marina I was able to catch my breath and pop the jib for a nice little downwind run through Shoal Channel.  The wind was quite fresh and even under jib alone I was hitting 4 knots.  I just love the Chebacco jib for this kind of work.  It is only thirty five square feet so it is plenty of pull for higher winds when the (relatively) huge mainsail work be just scary for me.  More on this later.

4 knots

This is the first time I had ever seen fishing trawlers in this part of Howe Sound.



 Rounding KeatsIsland the run was turning into a reach so I set the mizzen and by tying off the jib sheet to the tiller enjoyed miles of self steering goodness. 

Chilling with the self steering

Eventually the winds slacken and it was time to raise the main sail.  When alone I don’t usually run the jib and main as the number of lines required becomes a bother.  When attempting to furl the jib the furling line became jammed under the spool and the so I used a three mainsail ties to manually furling it around its own stay.  Crude but it worked. 

By this time the wind had again freshened so I decided to start out with a deep reef in the main.  It did not look pretty but worked well enough as a short time later I was racing along with green water soaking my back.  Great fun but admittedly a little scary too.  Starting to experience excessive weather helm (and the resulting rudder cavitation when corrected) I eased the mizzen until almost feathered and this settled things somewhat.  At some point the GPS recorded a maximum speed of 6.9 knots.

Deep reefed main and jury furled jib

Here is a link for a brief video of the action:http://www.youtube.com/watch?v=fS9oejhKwVk&feature=youtu.be


Halkett Bay is the furthest east of the bays along the south side of Gambier Island and eventually I reached a point where I would leave the reach and begin the run into the bay itself.  Because this was new territory for me I thought it prudent to drop the main sail and run in under power.  While starting the engine, without giving it my full attention due to the flapping sails and wind, the cord locked in mid pull which jammed my hands against the tiller.  I hit the little plastic clamp the holds the tiller extension in place, breaking it and slicing a bit of skin from the back of my hand.  Bleeding, I\managed to get the engine started and the sail furled.

Not having fun if someone does not get hurt!

At the head of the bay I dropped anchor within the marine park and enjoyed the next couple of hours relaxing in the sun, tidying up and sorting out the jib furling.  Bluster is a very light, unballast boat and she tends to wander around in any sort of breeze while at anchor.  

At anchor

With this mizzen set and sheeted in flat she holds fast into the wind. 


Around 7:00 pm the last of the day trippers vacated the dingy dock so I weighed anchor and relocated there for the night.

The park itself is very fetching with groves of sword ferns and maples.  There are several camping sites along the shore with picnic tables and pit toilet.





 I set about making my dinner of instant fried potatoes and scrambled eggs after which I finished cleaning up and securing the boat for the night.  It was 9:00 pm and still quite bright out but the long day was taking its toll so I crawled in the cuddy, relocated my gear to the port side, spread my sleeping bag out on a mattress of seat cushions and crashed.  First test for the new bug screen drop boards.


Galley set up

Dinner

Up at 6:00 for to take some photos and prepare a hot breakfast.  Virtually not wind so I fired up the Honda and motored out of Halkett Bay.

Morning at Halkett Bay

Hot breakfast - very civilized



For my route back to Gibsons I decided to take the Georgia Straight side, between Keats Island and the Paisely Island Group.  The incoming swells were on the uncomfortably large size but the wind was much less than  yesterday.  Bluster was tossed around quite a bit but lashing the boom to the gallows kept things tight and secure.

Bashing through the swells

Rounding the tip of Keats Island I entered Shoal Channel and around the corner to Gibsons Landing and the Marina.  I was a little worried because the tide was very low and only a bit of the float at the ramp was still floating but I managed to just tie up.  This is a good low water ramp so I had no trouble retrieving Bluster.


Low tide at the ramp

This was a very enjoyable trip that included solo sailing in the the highest winds yet for me.  Although it was both exciting and a little frightening for me I was very pleased with Bluster's performance and has given my confidence a nice push.  In higher winds I usually furl the main and use jib and mizzen combination so it was a good experience in main sail reefing.






Wednesday 5 June 2013

Bug Out

Another little project that I had on the books was to come up with a practical bug barrier for the companion way.  I thought about a velcro and netting but this would require unsightly PSA velro strips and these are also costly.  In the end I settled on a design utilizing some nice scrap plywood and netting left over from some screens I made up for the cottage.

Using the current drop boards I marked out the outline of on the plywood and the opening for the screens.  I decided to go with two plywood/screen drop boards (versus the four solid fir ones) to maximize the opening size and keep things simple.





While I was at it I outline a second lower drop board that would be kept solid (no screen) to allow for partial closing on cool nights.

The plywood drop board edges (and bottom of lower one) were rabbeted slightly to fit the groove in the companionway and then each piece was sanded and given a couple of good coats of marine varnish



Netting was simply attached to the inner surface of the boards using stainless steel staples.

The inner opening of the cowl vent I installed last year is is bug proofed with a bit of scrap screen and an elastic band.

When installed I now have a well ventilated and bug free cuddy cabin.  Looking forward to some good sleeps!